NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

EU-English

×

Pushbutton switch AP

Subminiature Pushbutton Switches

 
FeaturesFeatures
  • Gold-plated contacts.
  • Terminal pin pitch: 2.54 mm.

Specifications

Rating Max:50mA 48VAC/DC
Min:1μA 20mVAC/DC
Initial contact resistance 50mΩ max.(1.5mA 200μVAC)
Dielectric strength 500VAC 1 minute
Insulation resistance 10,000MΩ min.(250VDC)
Electrical life 10,000 operations at maximum rating.
50,000 operations at 0.4VA.
Operating temperature range -20~+85℃
Storage temperature range -40~+85℃

Part Number Designation

AP1C -2M- 10 - Z

Series

Actuator type

P: 

Pushbutton
(Non-washble)

No. of poles

1: 

1 pole

2: 

2 poles

SW function

C or M: 

Off-(On)

F or R: 

On-(On)

Terminals

2: PC straight

6: 

R/A 0.3" pitch

Actuator shape

M: 

Standard

S: 

Short

H: 

Square

Clip mechanism

List of Part Numbers

Part No.No. of polesSW functionTerminalsActuator shapeCAD
Part No.:AP1C-2H-Z 1 pole OFF-(ON) PC straight Square
Part No.:AP1C-2S-Z 1 pole OFF-(ON) PC straight Short
Part No.:AP1C-2M-Z 1 pole OFF-(ON) PC straight Standard
Part No.:AP1F-2M-Z 1 pole ON-(ON) PC straight Standard
Part No.:AP1F-2S-Z 1 pole ON-(ON) PC straight Short
Part No.:AP1F-2H-Z 1 pole ON-(ON) PC straight Square
Part No.:AP2R-2M-Z 2 poles ON-(ON) PC straight Standard
Part No.:AP1C-6M-Z 1 pole OFF-(ON) R/A 0.3" pitch Standard
Part No.:AP1C-6S-Z 1 pole OFF-(ON) R/A 0.3" pitch Short
Part No.:AP1F-6S-Z 1 pole ON-(ON) R/A 0.3" pitch Short
Part No.:AP1F-6M-Z 1 pole ON-(ON) R/A 0.3" pitch Standard
Part No.:AP2M-6S-Z 2 poles OFF-(ON) R/A 0.3" pitch Short
Part No.:AP2M-6M-Z 2 poles OFF-(ON) R/A 0.3" pitch Standard
Part No.:AP2R-6M-Z 2 poles ON-(ON) R/A 0.3" pitch Standard
Part No.:AP2R-6S-Z 2 poles ON-(ON) R/A 0.3" pitch Short
Part No.:AP1F-6S-Z 1 pole ON-(ON) R/A 0.3" pitch Short
Part No.:AP1F-6M-Z 1 pole ON-(ON) R/A 0.3" pitch Standard
Part No.:AP2M-6S-Z 2 poles OFF-(ON) R/A 0.3" pitch Short
Part No.:AP2M-6M-Z 2 poles OFF-(ON) R/A 0.3" pitch Standard
Part No.:AP2R-6M-Z 2 poles ON-(ON) R/A 0.3" pitch Standard
Part No.:AP2R-6S-Z 2 poles ON-(ON) R/A 0.3" pitch Short
☆: Semi-standard products / 
★: Made to order products

Soldering Specifications

  • Manual Soldering
    Device:Soldering iron
    ①380°C, Max.; 3 seconds, Max.
  • Auto Soldering (PC types only)
    Device:Jet wave type or dip type
    ①275°C, 6 seconds, Max.
    Pre-heating should be done at temperatures from 80 to 120°C and within 120 seconds.
  • When soldering two or more terminals to the common land, use solder resist to solder them independently.

Flux Cleaning

  • Solvent :Fluorine or Alcohol type
  • The AP series are not washable. To wash the PC board, clean the soldering surface of the PC board with a brush so that the switch is not exposed to the cleaning solution.

Environmental Data

●The above contents and descriptions are subject to change without notice. 

Products

×

page top