NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

EU-English

×

Tactile switch TME1

Tactile Switches

 
FeaturesFeatures
  • Compatible With Lead-Free Soldering
    Heat-resistance resin for lead-free soldering.
  • Washable
  • 2.54 mm Terminal Pins
  • Compatible with Automatic IC Insertion Machine
    (Stick packaging, 50 pcs/stick)
  • 180° Symmetric Terminal Pin Layout.
  • Anti-Static Electricity
    Ground terminal is provided to prevent damage to element caused by static electricity.
  • Metal contact for sharp tactile feel.
◆Structure

Specifications

Rating Max. 1VA max.( 50mA max.48VDC max.)
Initial contact resistance 100m Ω max. {1.5mA 200μVAC at 1.96N{200gf}force}
Dielectric strength 250VAC 1 minute
Insulation resistance 100MΩ min. (100VDC)
Electrical life 1,000,000 operations
Stroke 0.5±0.3mm
Operating force 1.96±0.98N
Oepmepraetriantgu re range -25~+70℃
Setmorpaegrea ture range -40~+70℃

Part Number Designation

TMEG1-01 -Z

Series

Contact plating

Blank: Silver plated
G:Gold plated

Structure

Registration No.

 

List of Part Numbers

 Part numberContact platingSwitching functionCAD
Part No.:TME1-01-Z Silver plated OFF-(ON)

Outline dimensions

Circuit diagrams

PC Hole Layouts

  •   The blue line shows the outline of the switch.
  • Terminal (E) to be connected to Ground. Terminal (E) is connected to the metal frame.

Soldering Specifications

  • Manual Soldering
    Device : Soldering iron
    380°C ±10°C; 3±0.5 seconds
  • Auto Soldering
    Device:Jet wave type or dip type
    275°C; 6 seconds, Max.
    ・Preheating should be at 80°C to 120°C, max., within 120 seconds.
  • When soldering two or more terminals to the common land, use solder resist to solder them independently.

Flux Cleaning

  • Solvent: Fluorine or Alcohol type Cleaning with other solvents or water is not possible.
  • Cleaning after soldering should be done after the terminal temperature falls to 90°C or below, or after leaving the switch for five minutes or longer at room temperature. Cleaning temperature: 43°C, max.
  • Do not use ultrasonic cleaning.

Environmental Data

●The above contents and descriptions are subject to change without notice. 

Products

×

page top