NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

Liste

×

×


Produkte

Verteiler

EU-Deutsch

×

Pushbutton switch 8N

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal  Überprüfen Sie die Verteiler.
VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.
Gehen Sie zum Farnell Online-Shop.
Gehen Sie zum DigiKey Online-Shop.
Gehen Sie zum MOUSER-Shop.

Standard Pushbutton Switches

 
FeaturesFeatures
  • The 8N standard pushbutton switch is the basic type of “8”Series. Momentary and alternate functions are available.Color button is available in 8mm, 10mm and 15mmdiameter and in 4 colors.

  • Silver or gold-plated contacts

  • Epoxy resin case UL94V-0 self-extinguishing epoxy.

  • Insulation between terminal and ground: 4 mm minimum. 

  • Prevention of flux entry The epoxy resin seal on bottom of the switch helps prevent short-circuiting between poles ensuring high reliability

  • Insulation barrier: Insulation barrier design between poles helps prevent short-circuiting between poles ensuring high reliability.

Part Number Designation

8N1011C- Z

Series

Actuator shape

A: Standard Pushbutton

No. of poles

1: 1 pole

2: 2 poles

3: 3 poles

4: 4 poles

Switching function

01: ON-ON

02: ON-(ON)

Terminal style

1: Solder

2: PC straight

Contact material / Plating

Blank: 

Bs+Ag or Cu+Ag / Silver plated (Ag)

/ Silver plated (Ag)

C: 

Bs+Ag or Cu+Ag / Gold plated (Ni+Au)

/ Gold plated (Ni+Au)

Bs=Brass, Ag=Silver, Cu=Copper,
Ni=Nickel, Au=Gold

◆Terminals

List of Part Numbers

 

 

 
 
Part No.No. of polesSW functionTerminalsCAD
Part No.:8N1011-Z 1 pole ON-ON Solder
Part No.:8N2011-Z 2 poles ON-ON Solder
Part No.:8N3011-Z 3poles ON-ON Solder
Part No.:8N4011-Z 4poles ON-ON Solder
Part No.:8N1021-Z 1 pole ON-(ON) Solder
Part No.:8N1021C-Z 1 pole ON-(ON) Solder (Gold plated)
Part No.:8N2021-Z 2 poles ON-(ON) Solder
Part No.:8N3021-Z 3poles ON-(ON) Solder
Part No.:8N4021-Z 4poles ON-(ON) Solder
Part No.:8N2012-Z 2 poles ON-ON PC Straight
Part No.:8N2022-Z 2 poles ON-(ON) PC Straight
Part No.:8N1022-Z 1 pole ON-(ON) PC Straight
☆: Semi-standard products / 
★: Made to order products / 
▲: Ask for details

Specifications

Max. rating 6A 125VAC/3A 250VAC/4A 30VDC
Initial contact resistance 10mΩmax.(1A 2~4VDC)
Initial dielectric strength 1,500VAC 1 minute
Initial insulation resistance 1,000MΩ min. (500VDC)
Electrical life Alternate type 40,000 operations
Momentary type 25,000 operations
Oepmepraetriantgu re range -30℃~+85℃
Setmorpaegrea ture range -40℃~+85℃

Panel Cut-Out Dimensions

PC Hole Layouts

Handling Precautions

◆Soldering Specifications
  • Manual Soldering
    Device : Soldering iron
    ①420℃, Max.; 3 sec., Max.
  • Auto Soldering
    ②275℃ ± 10℃, Max.; 5 seconds, Max.
    Note that the above-stated soldering conditions should be applied to the PC terminal type only.
◆Flux Cleaning
  • For the solvent, use the fluorine- or alcohol-based solvent.
    Solvent: Fluorine or Alcohol type
  • Since the 8 Switch Series switches are not waterproof-structured, if the PC board is to be cleaned, clean the soldering surface of substrate with a brush so that the switch is not exposed to the cleaning solution.
◆Mounting
  • Do not bend the terminals before mounting the switch on the PC board.
  • After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob of the switch.
  • To fix the PC terminal type, solder it on the PC board after fixing the switch body on the panel with the screw.

UL recognized, CSA certified Products

Environmental Data

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Produkte

×

page top